FILA Surface Care Solutions, HYBRID & EPOXY PRO, Instant Cleaner for Fresh Epoxy Grout residues, Grout Cleaner to use during Installation, Clean your Epoxy Floor Kit Tools after Epoxy Flooring, 24oz.

HYBRID & EPOXY PRO 24oz by FILA Surface Care Solutions.
Instant Cleaner for Fresh Epoxy Grout residues, urethan and pre-mixed/hybrid grout.
Suitable to use on porcelain and ceramic tiles, glass mosaic and quarry tiles.

SIZE AND COVERAGE
24oz spray.
– Porcelain and ceramic tile > Up to 160 sq. ft.
– Large format tile > Up to 1,148 linear feet.
– Mosaic > Up to 160 sq. ft.
Coverage rates are indicative.

ADVANTAGES:
– It dries fast.
– Ideal for cleaning grouting tools.
– Suitable as grout cleaner solution for vertical surfaces and walls.
– It does not damage steel trims, grout joints or aluminium while acts as epoxy tile haze remover.
– Safe for enviroment because it does not emit harmful fumes.
– Indoor and Outdoor use.
– Ready to use to remove fresh floor resin epoxy mix.

HOW TO USE IT:
1. Spray HYBRID & EPOXY PRO evenly on the surface.
2. Let the product sit for up to 3 minutes.
3. Wipe with a white pad without applying too much pressure, then rinse thoroughly.

If cleaning takes place a few hours after grouting, let the product sit on the surface for about 20 minutes.

CAUTION
– Do not use on absorbent materials such as absorbent stone, wood and methacrylate.
– Test the product before use to determine the material’s resistance and the dwell time required for the product to reach maximum effectiveness.

X
Imported
EPOXY FLOOR CLEANER: Use our product to remove fresh residue of Epoxy, Urethan and pre-mixed/hybrid grout.
TILE GROUT CLEANERS: Our product doesn’t damage grout joints while act as epoxy grout film remover.
RAPID DRY: It acts quickly as residue remover cleaning your epoxy tile grout.
THICK CONSISTENCY: Our epoxy cleaner can be used on vertical surfaces thanks to its gel-like consistency
NO RINSING NECESSARY: FILA HYBRID & EPOXY PRO epoxy resin remover doesn’t foam.
SAFE FOR ALUMINIUM AND STEEL RIMS: Our epoxy grout haze remover does not damage your finishes.
SAFE FOR THE INSTALLER: the FILA epoxy grout haze remover for tile does not emit harmful fumes.
READY TO USE: Our epoxy remover acts in just 3 minutes on fresh epoxy grout for shower or floor.
INDOOR AND OUTDOOR USE: Suitable to use on porcelain and ceramic tiles, glass mosaic and quarry tiles
100% MADE IN ITALY: at FILA, we take care of the beauty of surfaces over time, bringing wellness and balance into spaces brimming with life. We’ve been doing this since we can remember, using innovative and sustainable methods.